General Specifications
- Frequency Range (-10dB)
- 55 Hz – 20 kHz
- Frequency Response (±3 dB)
- 80 Hz – 20 kHz
- Coverage Pattern
- 90° x 90°
- Directivity Factor (Q)
- 10.1 (1 k – 16 kHz)
- Directivity Index (DI)
- 9.5 dB (1k – 16 kHz)
- System Power Rating
- 400 W (1600 W peak), 2 hrs. 250 W (1000 W peak), 100 hrs
- Sensitivity (2.83V @ 1m)
- 96 dB (Ave. 80 Hz – 20 kHz)
- Maximum SPL (1m)
- Direct 8Ω = 122 dB (peaks of 128 dB) 200 W Tap = 119 dB
- Crossover Network
- 1.5 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF
- Nominal Impedance
- 8 ohms
- Transformer Taps
- 70V = 200W, 100W, 50W, 25W ; 100V = 200W, 100W, 50W
- LF Driver
- Kevlar-reinforced cone with weather treatment, 75 mm (3 in) voice coil
- HF Driver
- 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling
- HF Driver Protection
- Minimum audibility SonicGuard? HF overload protection
- Enclosure
- ABS with Glass enclosure, heavily braced
- Attachment
- Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
- Grille
- Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3- layer assembly with foam and woven poly mesh backing
- Input Connection
- CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16) and 9.0 mm (0.36)
- Environmental
- IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).
- Included Accessories
- U-bracket, matches loudspeaker color (gray or black), zinc-rich extra thick powder coated, steel
- Suspension Attachment
- Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
Dimensions
- Dimensions
- 402 x 402 x 445mm (15.8 x 15.8 x 17.5 in), cabinet 470 mm (18.5 in) depth with gland nut 542 mm (21.4 in) including bracket extending to back
- Net Weight (each)
- 15.9 kg (35.0 lb), 18.9 kg (41.5 lb) with u-bracket
- Shipping Weight
- 23.4 kg (51.5 lbs)
