General Specifications
- Frequency Range (-10 dB)
- 90 Hz – 20 kHz
- Power Capacity
- 200 Watts Continuous Program Power (at 8 ohm bypass mode) ; 100 Watts Continuous Pink Noise (at 8 ohm bypass mode) ; 60 Watts (at 60W tap setting
- Nominal Sensitivity
- 87 dB, 1W at 1 m (1 kHz – 10 kHz, ave., at 8 ohm bypass mode) ; 71 dB, 1W at 4m per EN54-24 (100 Hz – 10 kHz, ave., 60W tap)
- Nominal Coverage Angle
- 110° x 85° (1 kHz to 16 kHz, ave.)
- Typical Horizontal
- 120° at 4 kHz, 120° at 2 kHz, 155° at 1 kHz, 360° at 500 Hz
- Typical Vertical
- 100° at 4 kHz, 85° at 2 kHz, 160° at 1kHz, 360° at 500 Hz
- Directivity Factor (Q)
- 4.8 (500 Hz to 4kHz)
- Directivity Index (DI)
- 6.5dB (500 Hz to 4kHz)
- Rated Maximum SPL
- 107 dB @ 1 m (3.3 ft) average, 113 dB peak, at 8 ohm bypass mode ; 89 dB at 4 m (13.2 ft) average, at 60W tap setting, measured.
- Rated Impedance
- 8 ohms (in bypass, position 5, mode) – tap 1 = 667 ohms; tap 2 = 333 ohms; tap 3 = 167 ohms, tap 4 = 83 ohms (typical)
- Transformer Taps
- 60W 30W, 15W, (& 7.5W @ 70V)
- Low Frequency Transducer
- 130mm (5.25 in) with polypropylene coated paper cone with WeatherEdge surround, 25 mm (1 in) voicecoil on kapton former
- High Frequency Transducer
- 20mm (.75 in) titanium coated PEI
- Included Accessories
- 1 pc MTC-PC2 input panel cover, Invisiball mounting base, 6 mm x 100 mm Invisiball hex wrench
- MTC-25V for vertical columnar mounting of up to 3 speakers ; MTC-25/23H for horizontal splaying of 2 speakers. Three brackets array either 3 or 6 speakers in a hanging array module for 360° horizontal coverage. ; MTC-28/25CM to install speaker down from the ceiling.
Dimensions
- Dimensions (H x W x D)
- 236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in)
- Net Weight
- 3.8 kg (8.4 lbs) ea
- Shipping Weight
- 8.6 kg (19 lbs) pair
Design
- Input Connectors
- Captive screw-down terminals, zinc-plated copper base, nickel plated metal screws/washers, accepts up to 9 mm outside 4 mm inside open lug, plus bare wire up to 12 AWG (2.5 mm)
- Cabinet Material
- ABS, (materials rated UL94-5VA)
- Grille
- Aluminum with polyester powder coating
- Safety Agency: UL1480-UUMW Listed (S7232), EN54-24:2008 certified (Certificate No. 0359-CPR-00245), NFPA90, NFPA70A, and in accordance with the requirements of IEC60849/EN60849
