General Specifications
- Components
- Sixteen 50 mm (2 in) Full-Range
- Frequency Range (-10 dB)
- 120 Hz – 20 kHz
- Coverage Pattern (Vertical Narrow Mode)
- 15° (2 kHz – 16 kHz) (±10°)
- Coverage Pattern (Vertical Broad Mode)
- 40° (1 kHz – 16 kHz) (±10°)
- Coverage Pattern (Horizontal)
- 150° (ave, 1 kHz – 4 kHz, ±20°)
- Sensitivity (2.83V@ 1m) Narrow
- (speech mode) 96 dB (2 kHz – 14 kHz ) ; (music mode) 93 dB (300 Hz – 18 kHz)
- Sensitivity (2.83V@ 1m) Broad
- (speech mode) 93 dB (2 kHz – 14 kHz) ; (music mode) 90 dB (300 Hz – 18 kHz)
- EN54 Sensitivity (@ 4m)
- 76 dB (per EN54:24 spectrum and measurement conditions at 4 meters, set at broad/music mode.)
- Nominal Impedance 8 ohms (in Thru mode)
- 15w@70v; 30w@100v Tap = 333Ω ; 30w@70v; 60w@100v Tap = 167Ω ; 60w@70v; 120w@100v Tap = 83Ω ; 120w@70v; N/C@100v Tap = 42Ω
- Power Capacity (8 ohm setting)
- 325 W (1300W peak), 2 hrs ; 200 W (800W peak), 100 hrs
- Max SPL Narrow
- (speech mode) 121 dB cont ave (127 peak) ; (music mode) 118 dB cont ave (124 peak)
- Max SPL Broad
- (speech mode) 118 dB cont ave (124 peak) ; (music mode) 115 dB cont ave (121 peak)
- EN54 Max SPL (@ 4m)
- 92 dB (per EN54:24 spectrum and measurement conditions, at 4 meters)
- 70V/100V Transformer Taps
- 120W, 60W, 30W, (15W at 70V only), and 8 thru, via switch
- Reference Axis
- Specification and measurement referenced on-axis vertically and horizontally to the center point of the speaker baffle.
- Outdoor Capability
- IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.
- Insert Points
- 18 M6 insert points on back panel.
- Mounting
- Included swivel (pan)/tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt — see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points. Eighteen threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount? 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.
- Safety Agency
- EN54-24/2008 certified (Certificate No. 0359-CPR-00432), when installed with MTC-PC2 terminal panel cover. Cabinet UL94-5VB flammability rated. In accordance with the requirements of IEC60849/EN60849. Transformer UL registered per UL1876.
- Included Accessories
- Swivel (pan) / tilt wall bracket ; MTC-PC2 terminal panel cover
- Optional Accessories
- MTC-CBT-FM1 flush-mount low-profile wall-mount bracket MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand
Dimensions
- Height
- 1000 mm (39.4 in)
- Width
- 98.5 mm (3.8 in)
- Depth
- 153 mm (6.0 in)
- Net Weight
- 7.2 kg (15.8 lb)
Design
- Enclosure
- Fiberglass reinforced ABS cabinet with UL94-5VB flammability rating, painted aluminum grille
