General Specifications
- Components
- Eight 50 mm (2 in) Full-Range
- Frequency Range (-10 dB)
- 80 Hz – 20 kHz
- Coverage Pattern
- Vertical 20° (1.5 kHz – 16 kHz, ±10°) ; Horizontal 150° (ave, 1 kHz – 4 kHz, ±20°)
- Sensitivity (2.83V@ 1m)
- 93 dB (speech mode, 2 kHz – 14 kHz) ; 89 dB (music mode, 300 Hz – 18 kHz)
- Nominal Impedance
- 8 ohms
- Power Capacity (8 ohm setting)
- 150W (600W peak), 2 hrs ; 100 W (400W peak), 100 hrs
- Max SPL (Speech mode)
- 115 dB cont ave (121 peak)
- Max SPL (Music mode)
- 111 dB cont ave (117 peak)
- 70V/100V Transformer Taps
- 60W, 30W, 15W, (7.5W at 70V only), and 8Ω thru, via switch
- Outdoor Capability
- IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.
- Insert Points
- Ten M6 swivel (pan)/tilt insert points on back panel.
- Mounting
- Included swivel (pan) / tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt — see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points within the range. Ten threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount? 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.
- Included Accessories
- Swivel (pan) / tilt wall bracket
- Optional Accessories
- MTC-PC2 terminal panel cover ; MTC-CBT-FM1 flush-mount low-profile wall-mount bracket ; MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand
Dimensions
- Height
- 528 mm (20.8 in)
- Width
- 99 mm (3.9 in)
- Depth
- 153 mm (6.0 in)
- Net Weight
- 4.1 kg (9.0 lb)
Design
- Enclosure
- Fiberglass reinforced ABS cabinet, painted aluminum grille
