200 W Continuous Program Power ; 100 W Continuous Pink Noise
Transformer Taps 70V
60 W, 30 W, 15 W, 7.5 W
Transformer Taps 100V
60 W, 30 W, 15 W
Nominal Sensitivity
87 dB SPL, 1 W @ 1 m (3.3 ft)
Midrange (±1.5 dB, typical)
130 Hz – 14 kHz
Nominal Coverage
100° x 100°
Maximum SPL @ 1m
113 dB continuous peak pink noise 107 dB continuous average pink noise 103 dB continuous average music or speech
Directivity Factor (Q)
4.9 dB, averaged 500 Hz to 4 kHz
Directivity Index (DI)
6.9 dB, averaged 500 Hz to 4 kHz
Nominal Impedance
8 ohms
Minimum Impedance
6.7 ohms at 230 Hz
Crossover Network
Second Order Low Pass, Second Order High Pass, Complex Optimization for Maximally Flat Response
Low Frequency
130 mm (5.25 in) polypropylene-coated paper with WeatherEdge surround, 25 mm (1 in) voicecoil on kapton former
High-Frequency
20 mm (.75 in) titanium coated PEI
Overload Protection
Full-range power limiting to protect network and transducers. Internal fuse to protect during exceptional overload condition
Environmental
Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IEC 529 IP-X4 splashproof rating
Terminations
Screw-down terminal strip, zinc-plated copper base, nickel plated metal screws/washers, accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10), plus bare wire. (up to 12 AWG)
Safety Agency Rating
Transformer is listed per UL1876
Rotation
Against wall on InvisiBall Base – 37° vertical 44° horizontal ; On bracket – 44° all directions
Included Accessories
1 Pr MTC-PC input panel cover, InvisiBall mounting base, 6 mm x 100 mm InvisiBall hex wrench
Dimensions
Height
236 mm (9.3 in)
Width
186 mm (7.4 in)
Depth
159 mm (6.3 in)
Net Weight (ea)
4.0 kg (9 lb)
Shipping Weight (ea)
9.0 kg (20 lb) per pair
Design
Enclosure Material
High Impact polystyrene
Grille
Painted stainless steel, black or white to match cabinet, paintable
